Description
Fits D Series saddles and accessories. Can be used for attaching a variety of accessories. 11″ Long, 4″ wide plate, 3″ wide dovetail, .5″ thick, Wt. 27 oz.
DUP11M- D Series Universal Dovetail Bar. 11″ Long, 60mm Spacing
$84.00
INCLUDED ITEMS:
-dovetail bar
-4x 1/4×20 low profile SHCS
-4x 6mm low profile SHCS
-2x safety stop
Additional information
| Weight | 2 lbs |
|---|---|
| Dimensions | 12 × 5 × 2 in |
Lionel S. (verified owner) –
This bar is a perfect size and fit for my AP130GTX rings and is a few ounces lighter than the 12″ AP bar recommended for this scope. Two sizes of cap screws are included as well as two plastic head safety screws for both ends of the bar.
A minor glitch…. the included safety screws won’t work with my 6″ dual channel V and D saddle because the heads are low profile and can slip right through the V cutout.
Richard T. (verified owner) –
Well made and finished. Wish the slot continued to the middle of the bar would be my only suggestion to make it perfect.
Mark Pogorzelski (store manager) –
Richard, Thank you for the review and feedback. I will forward your suggestion onto the owner as a client suggestion. -ADM Accessories
Mike Harden (verified owner) –
Item was shipped and received in a timely fashion. ADM quality is always there.
Mark Pogorzelski (store manager) –
Mike, thank you for the awesome review.-ADM Accessories.
Bryan Ross (verified owner) –
Always 1st rate. Love that they are made in USA as well. Anthony did a special order job for me on these and 2 other Losmandy plates, and they turned out fantastic, cannot say enough about ADM. You will not be disappointed.
Mark Pogorzelski (store manager) –
Bryan, thank you for the wonderful review! So happy to be able to provide you with what you needed.-ADM Accessories.
Robert Lee (verified owner) –
Excellent product, well cut and fits Parallax rings perfectly. Lengthwise slot allows ring spacing to fit a handle I had for lifting the OTA.
Mark Pogorzelski (store manager) –
Robert, thank you for the great feedback! So glad to hear that the Universal Dovetail Bar meets your expectations.-ADM Accessories.
Robert (verified owner) –
Mark Pogorzelski (store manager) –
Thank you Robert for the review.-ADM Accessories.
Shail (verified owner) –
Very well machined. However the insets for the screw heads are sized for SAE low profile SHCS (1/8″ height) rather than metric low profile SHCS (4 mm height). So the metric low profile screws stick out. The dovetail bar should be shipped with the ultra low profile metrics SHCS or the insets need to be deeper.
Mark Pogorzelski (store manager) –
Steven, thank you for the Awesome Feedback! I’ll pass your feedback onto the owner.-ADM Accessories.
David A. (verified owner) –
The pair of ADM 11″ – 60mm dovetails are replacing the 15″ plates that are cumbersome on a 115mm APO. The fit and finish on the 11″ plates are top notch like the other ADM gear in my setup. There were a couple of issues with the provided kit. A minor item was mismatched screws, one set using a 4mm hex wrench and the other a 5mm. The top of the machine screws sat a bit proud of the plate surfaces causing a snag. Not sure if the inset holes in the plate were too shallow or the screwheads a bit long. I ground the screw heads down enough that anything sliding on the plate would no longer catch and it solved the issue.
Really happy with the fit and finish. It works well on the 115mm APO and like the other ADM gear in my setup, I know it’s going to last a long time.
Mark Pogorzelski (store manager) –
David, thank for the feedback. I’ll be sure to pass the information onto Anthony.-ADM Accessories.